Amdeck Floor & Roof System
Amdeck Eco is a modular, stay in place formwork
manufactured using Type II/Type 2, closed cell
Expanded Polystyrene (EPS). It allows for the
construction of one-way, reinforced concrete slabs
ideal for low rise residential and small buildings
applications.
Amdeck Eco has integrated slots for dimensional
lumber wood joists to support temporary
construction loads, utilizing an appropriate shoring
system.
It can be used for floors and roofs (both horizontal
and sloped configurations). It is perfectly suited for
use with ICF walls or independently with other wall
types.
Amdeck Advantage
Modular System
Amdeck Eco comes in standardized, lightweight 8’ (2.4m) sections. The sections are joined on-
site to construct the floor or roof in an easy and fast manner. Amdeck Eco sections can also be
easily cut from all directions to fit a specific span, width or curvature making the system
extremely flexible
Joist Attachment
Amdeck Eco uses 2×6” (38x140mm) dimensional lumber joists which is commonly available in most regions reducing material costs and installation time. The wood joists are anchored back to the
concrete and allow for easy interior finish installation.
- Each 8’ (2.4m) section of Amdeck Eco uses four short screws, four long screws and twelve 2” (51mm) washers.
Amdeck Eco 8”: x4 – 4” (102mm) screws with single washer and x4 – 6” (152mm) screws with double washers
Amdeck Eco 10”: x4 – 6” (152mm) screws with single washer and x4 – 8” (203mm) screws with double washers - Amdeck Eco 12”: x4 – 8” (203mm) screws with single washer and x4 – 10” (254mm) screws with double washers
Applications
.Floors
.Car garage floors
.Flat or sloped roofs
.Green Roofs
.Safe rooms
.First floor in high risk flood areas
.High wind/hurricane areas
.Small buildings and low rise
.residential
.Terraces and balconies
.Cold cellar
